Welding in wheel housings and side members
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL HOUSINGS AND SIDE MEMBERS REFERENCE (WELDING)
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Welding in the inner side member. | Weld the inner side member with a full butt weld -F- . See Fig 1 . |
| 2 | Welding in wheel housings. | Spot-weld wheel housings and inner side members -A-B- . See Fig 1 . |
| 3 | Welding in the outer side member. | Spot-weld the outer side member to the inner side member -H, I-F- . See Fig 1 . |
| 4 | Welding in front wall | See WELDING IN FRONT WALL |
| 5 | Welding in closing panel and front floor panel | See REPLACING CLOSING PANEL |