LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (General Information - Body) >> Seam seals >> Accessories

Seam seals: Accessories

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Due to modifications to the spare part range, in the case of repair work, accessories must be sealed before assembly (painting) according to the following illustrations.
  • Sealing material can be applied directly to the accessories coated with KTL paint (cathodic dipbath coating). See TOOLS AND MATERIALS  .
  • The seam seal can be painted over when it has reached approx. 70 % hardness (approx. 4-5 hour at 20 "C, 50 % relative air humidity. Higher air humidity or dampening with water accelerates the hardening process).
  • The hardening can be checked with a nail test. Press a finger nail gently into the hardened sealing mass; if this causes no damage to the sealing mass surface, the seam seal can be painted.
scientia non olet · About LEMON Manuals