LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (General Information - Body) >> Body parts of high-strength steel >> Welding work

Welding work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The use of the oxyacetylene welding process is not permissible for body parts made of high-strength steel!
  • Test welding must be carried out in the case of resistance spotwelding (RP) of different panel strengths!

The body parts made from high-strength steel can be welded using the RP resistance spot-welding or MIG welding processes that are customary in workshops.

scientia non olet · About LEMON Manuals