Stranghtening body parts
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Only "Original Porsche parts" or sections of "Original Porsche parts" may be used!
The body and floor assembly are produced in series from deep-drawn panels. For this reason, accident damage must be reshaped in the same way. Body repairs by reshaping are not possible if these body parts are correspondingly deformed. Here, the repair must be carried out using new parts or by means of sectional repairs. The separation of damaged body parts after reshaping against the accident direction should not take place until after connection pieces have been straightened.