LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Rear Wheel Suspension, Axle Shaft) >> Tightening torques for rear axle >> Unit mount >> Engine mount

Engine mount

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE MOUNT TIGHTENING TORQUE SPECIFICATIONS

Location Thread Tightening torque [Nm] (ftlb.)
Engine carrier to body M10 x 1.5 65 (48)
Stud for engine carrier in body M10 20 (15)
Engine mount to engine carrier M10 x 1.5 65 (48)
Engine bracket to engine M10 x 1.5 46 (34)
scientia non olet · About LEMON Manuals