LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Rear Wheel Suspension, Axle Shaft) >> Tightening torques for rear axle >> Stabiliser

Tightening torques for rear axle: Stabiliser

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
STABILISER TIGHTENING TORQUE SPECIFICATIONS

Location Thread Tightening torque [Nm] (ftlb.)
Stabiliser to carrier side section M8 23(17)
Stabiliser to
stabiliser mount		 M10 x 1.5 50 (37)
Stabiliser to
spring strut/wheel carrier		 M12 x 1.5 85 (63)
scientia non olet · About LEMON Manuals