Carrier side section/cross member
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
CARRIER SIDE SECTION/CROSS MEMBER TIGHTENING TORQUE SPECIFICATIONS
| Location | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|
| Carrier side section to body | M10 x 1.5 | 65 (48) |
| Studs for carrier side section to body (only screw-in torque) | M10 x 1.5 | 20(15) |
| Cross member to carrier side section | M10 x 1.5 | 65 (48) |
| Sheetmetal brace to carrier side section (collar nut) | M10 x 1.5 | 65 (48) |
| Sheetmetal brace to cross member (hexagon-head bolt) | M10 x 1.5 | 46 (34) |
| Sheetmetal brace to V strut (rear transverse strut) (collar nut) |
M10 x 1.5 | 65 (48) |
| V strut (rear transverse strut) to body |
M10 x 1.5 | 65 (48) |
| Diagonal brace to body (hexagon-head bolt) | M10 x 1.5 | 65 (48) |
| Diagonal brace to carrier side section (collar nut) | M10 x 1.5 | 65 (48) |
| Cable to cross member | M8 | 23(17) |
| Cable to engine | M8 | 23(17) |