Distinguishing feature of coil springs and dampers
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
A = Identification for the running gear version (spring constant/spring length) by two different lines (for example, 1 x red and 1 x yellow). Refer to the Parts Catalogue for the allocation.
B = Identification of the coil spring tolerance group (load group) for determination of the compensation part (spring plate) thickness.
1 white line = 3.0 mm thick compensation part.
1 green line = 6.5 mm thick compensation part.
C = Colour dot (colour label) to differentiate the damper identifier.
Blue dot = Standard running gear RoW/USA
Red dot = Sport-type running gear RoW/USA
- Tension coil spring with spring clamp.