LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Glasses, Window Control Diagnosis - 911 CARRERA (996) >> Fault code 9 >> Diagnosis/troubleshooting

Fault code 9: Diagnosis/troubleshooting

DIAGNOSIS/TROUBLESHOOTING FOR FAULT CODE 9

Work instruction Display OK If not OK
1 Visual inspection
  • Check whether the plug connections of the Targa rear window closing aid or of the control module are connected and are locked
 Step 2 Connect and lock plug connections
-> End
2 Check the lead from the control module to the Targa rear window closing aid for open circuit
  • Measure resistance between plug A on control module pin 24 and plug on the Targa rear window closing aid pin 5
  • Measure resistance between plug A on control module pin 25 and plug on the Targa rear window closing aid pin 5
 < 5
Step 3		 Repair wiring harness
-> End
3 Check the lead from the Targa sliding roof micro switch to the control module for open circuit
  • Measure resistance between plug A on control module pin 5 and plug on the Targa rear window closing aid pin 3
 < 5
Step 4		 Repair wiring harness
-> End
4
  • Replace closing aid for Targa rear window
 -> End
scientia non olet · About LEMON Manuals