Fault code 1: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING FOR FAULT CODE 1
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check switch for Targa sliding roof |
|
Switch not actuated Switch in the direction close actuated < 5 Step 2 |
Replace switch for Targa sliding roof -> End |
| 2 | Check switch for Targa sliding roof |
|
Switch not actuated Switch in the direction open actuated < 5 Step 3 |
Replace switch for Targa sliding roof -> End |
| 3 | Check leads between the Targa sliding roof switch and the control module for short circuit to ground |
|
-> End | Repair wiring harness -> End |