LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Convertible Top, Hardtop Diagnosis - 911 CARRERA (996)) >> System B 3.2 >> Tools >> Test adapter mounting instructions

Test adapter mounting instructions

WARNING: This page is about a different variant/trim than selected.

The test adapter 9616 must be used for all tests on electrical wiring (e.g. convertible-top control module connectors/micro-switches/potentiometers).

It does not damage the plug-in (miniature) contacts and facilitates location of the individual pins.

Use test adapter 9636 in conjunction with test adapter 9616 and pin template 9636.

Disconnect the vehicle wiring harness from the convertible-top control module.

Connect test adapter 9636  to the convertible-top control module and the vehicle wiring harness.

Connect the 88-pole connector of test adapter 9636  to test adapter 9616  . Lay pin template 9636  . on top of test adapter 9616  .

scientia non olet · About LEMON Manuals