Work preparation

NOTE: If the key is stolen or the hand-held transmitter is faulty, all keys still in the customer's possession will be required!

The following information is required to teach the hand-held transmitter:

Key learning code from IPAS
24-digit Code No. (see barcode label on key grip)

NOTE:

During maintenance work, please bear in mind that the transmission frequency of the hand-held transmitter is different according to the country of use!
The corresponding reception frequency is printed on the alarm system control module!

This reception frequency is either:

433 Mhz with M-number M534
or
315 Mhz with M-number M535