LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Lights, Lamps, Switches Interior, Theft Protection - 911 Turbo (996) >> Removing and installing relay for main switch - GT2, as of MY 2001 >> Operating the main battery switch >> Status - A - Road. Status - B - Racing track

Status - A - Road. Status - B - Racing track

Fig 1: Identifying Main Battery Switch Status Positions - GT2, As Of MY 2001
G03091744Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • Turn the red actuation toggle (on the main battery relay) clockwise as far as the stop, status - A -  (bayonet). The main battery relay and the inner and outer EMERGENCY STOP switches are without function.
NOTE:
  • Turn the red actuation toggle anti-clockwise and remove, status - B -  . Refer to Fig 1 .
    Fig 2: Removing Red Actuation Toggle - GT2, As Of MY 2001
    G03091745Courtesy of PORSCHE OF NORTH AMERICA, INC.
  • Outer EMERGENCY STOP switch - left cowl panel cover, standard - press forwards (switch position On). The EMERGENCY STOP switch is actuated with the red pull loop, which can be disengaged and laid towards the outside under the rear edge of the luggage compartment lid.
    Fig 3: Identifying Emergency Stop Switch Red Pull Loop - GT2, As Of MY 2001
    G03091746Courtesy of PORSCHE OF NORTH AMERICA, INC.