LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (1 Of 2)) >> Oil Pan Cleaning and Inspection

Oil Pan Cleaning and Inspection

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Inspecting Oil Pan
    GM797248Courtesy of GENERAL MOTORS CORP.
  1. Clean the oil pan mating surface.
    2. Fig 2: View Of Oil Pan Baffle
    GM1825074Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pan baffle bolts.
    3. NOTE: Do not remove the pickup screen. It is press-fit into the oil pan.
  3. Remove the oil pan baffle.
  4. Clean the oil pan. Remove all the sludge and the oil deposits.
  5. Inspect the engine oil drain plug threads.
  6. Inspect the oil pan for cracking near the pan rail and the transmission mounting points.
  7. Inspect the oil pan for cracking resulting from impact or flying road debris.
  8. Inspect the oil pan baffle and pickup screen.
  9. Install the oil pan baffle.
    10. CAUTION: Refer to Fastener Caution .
  10. Install the oil pan baffle bolts and tighten to 14 N.m (10 lb ft).
scientia non olet · About LEMON Manuals