LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (1 Of 2)) >> Exhaust Manifold Removal

Exhaust Manifold Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Exhaust Manifold Heat Shield
    GM1769548Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust manifold heat shield bolts.
  2. Remove the exhaust manifold heat shield.
    3. Fig 2: Identifying Exhaust Manifold, Exhaust Manifold Gasket & Nuts
    GM2146280Courtesy of GENERAL MOTORS CORP.
    NOTE: Use an inverted Torx® socket E16 to remove the Torx® nut (3).
  3. Remove the exhaust manifold nuts.
  4. Remove the exhaust manifold (1).
  5. Remove the exhaust manifold gasket (2).
    6. Fig 3: Identifying Block Heater & Bolt
    GM1769551Courtesy of GENERAL MOTORS CORP.
  6. Remove the block heater bolt, if equipped.
  7. Remove the block heater, if equipped.
scientia non olet · About LEMON Manuals