LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 2.0L - Repair Instructions - Off Vehicle (1 Of 2)) >> Crankshaft Balancer Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View of Engine Flywheel
    GM2148522Courtesy of GENERAL MOTORS CORP.
  1. Install J 43653  (1) in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.
    2. Fig 2: View Of Crankshaft Balancer & Bolt
    GM2074506Courtesy of GENERAL MOTORS CORP.
  2. Remove the balancer retaining bolt and washer. Discard the bolt.
  3. Remove the balancer using a universal removal tool.
scientia non olet · About LEMON Manuals