Windshield Wiper Motor Replacement
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the windshield wiper transmission. Refer to Windshield Wiper Transmission Replacement |
|
| 1 | Windshield Wiper Motor Crank Arm Nut
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 2 | Windshield Wiper Motor Bolt (Qty: 3) Tighten: 6 N.m (53 lb in) |
| 3 | Windshield Wiper Motor Wiring Harness Assembly Procedure: Disconnect the harness electrical connector from the wiper motor. |
| 4 | Windshield Wiper Motor Assembly |