Child Seat Restraint System Belt Bracket Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Child Restraint Tether Anchor Plate & Nut

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Back Cushion Replacement , and Rear Seat Cushion Replacement .
1	Child Restraint Tether Anchor Plate Nut CAUTION: Refer to Fastener Caution . Tighten 45 N.m (33 lb ft)
2	Child Restraint Tether Anchor Plate