Removal Procedure
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the Instrument panel carrier to access the sunroof drain hose end. Refer to Instrument Panel Carrier Replacement .
- Lower the headliner in order to access the drain hose connections. Refer to Headlining Trim Panel Replacement (With PLA) , Headlining Trim Panel Replacement (Without PLA) .
- Cut the tie wraps from the drain hoses.
- Disconnect the front drain hoses from the sunroof module assembly.
- Remove the interior moldings in order to access the drain hose retaining clips. Refer to Windshield Pillar Garnish Molding Replacement .
- Remove the tape from the drain hoses on the windshield pillars.
- Remove the front inner wheelhouse liners. Refer to Front Wheelhouse Liner Replacement .
- Remove the front drain hose from the inner wheelhouse of the vehicle.