Windshield Pillar Garnish Molding Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Windshield Pillar Garnish Molding Replacement
| Callout |
Component Name |
| 1 |
Windshield Side Garnish Molding Cover Procedure
- Disconnect the electrical connector.
- The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield pillar garnish molding is removed.
|