Rear Seat Back Cushion Heater Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Back Cover & Pad

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Replacement . Remove the rear seat head restraints, if equipped. Refer to Rear Seat Head Restraint Replacement .
1	Cover, Rear Seat Back Cushion Refer to Rear Seat Back Cushion Cover and Pad Replacement .
2	Heater Assembly, Rear Seat Back Cushion (Qty: 2) TIP: Peel the heater elements from the seat cushion back pad and disconnect the electrical connector.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Replacement .
Remove the rear seat head restraints, if equipped. Refer to Rear Seat Head Restraint Replacement .

Cover, Rear Seat Back Cushion
Refer to Rear Seat Back Cushion Cover and Pad Replacement .

Heater Assembly, Rear Seat Back Cushion (Qty: 2)
TIP: Peel the heater elements from the seat cushion back pad and disconnect the electrical connector.