Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Back Ventilation Heating & Cooling Blower, Screws & Finish Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling .
1	Seat Back Cushion Finish Panel Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement .
2	Seat Back Blower Assembly Screw (Qty: 3)
3	Seat Back Blower Assembly TIP: Disconnect the electrical connector.