LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Bumpers And Fascias) >> Repair Instructions >> Front Bumper Impact Bar Bracket Replacement

Front Bumper Impact Bar Bracket Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View of Front Bumper Impact Bar Bracket & Components
GM1828974Courtesy of GENERAL MOTORS COMPANY
Front Bumper Impact Bar Bracket Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .
  3. Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement .
1 Front Bumper Bar Bracket Nut (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 Front Bumper Impact Bar Bracket Retainer
3 Front Bumper Impact Bar Bracket
scientia non olet · About LEMON Manuals