Front Bumper Impact Bar Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Impact Bar & Bolts - Front Bumper

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove front fascia. Refer to Front Bumper Fascia Replacement .
1	Front Bumper Bar Bolt (Qty: 8) CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Front Bumper Bar TIP: Remove push pin from front side radiator baffle.