LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Rear Side Door Window Inner Sealing Strip Replacement

Rear Side Door Window Inner Sealing Strip Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Door Window Inner Sealing Strip
GM1586911Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Inner Sealing Strip Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the rear door window reveal molding. Refer to Rear Side Door Window Reveal Molding Replacement .
1 Sealing Strip, Rear Door Window Inner
TIP:  Pull the sealing strip away from the window flange to remove.


Fig 1: Sealing Strip Replacement - Rear Door Window Belt Inner
GM1588709Courtesy of GENERAL MOTORS COMPANY
Rear Side Door Window Inner Sealing Strip Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
Preliminary Procedure 
Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
1 Sealing Strip, Rear Door Belt Inner
TIP:  Pull the belt sealing strip off of the door flange.