Intermediate Clutch Sprag Assemble

Special Tools 

J 36850:  Assembly Lubricant

For equivalent regional tools, refer to Special Tools .

Fig 1: Identifying Intermediate Sprag Clutch Assembly & Thrust Washer
Courtesy of GENERAL MOTORS CORP.
1. Apply J 36850:  lubricant to the input and reaction carrier inner shaft thrust washer (11) and install into the intermediate sprag clutch assembly (12).
Fig 2: Identifying Intermediate Sprag Clutch Assembly
Courtesy of GENERAL MOTORS CORP.
2. Install the intermediate sprag clutch assembly (12) into the case.