Transmission Fluid Cooler Flushing and Flow Test (J 35944-A): Clean-up
- Disconnect the water supply hose from the J 35944-A: line flusher and bleed any remaining air pressure from the flusher tank.
- Remove the fill cap from the J 35944-A: line flusher and return any unused flushing solution to its container. Rinse the J 35944-A: line flusher with water. Do not store the J 35944-A: line flusher with flushing solution in it.
- After every third use, clean the J 35944-A: line flusher as described in the instructions included with the tool.
- Dispose of any waste water/solution and transmission fluid in accordance with local regulations.