LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Transmission Control Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Identifying Shift Control Linkage Rod
    GM1954218Courtesy of GENERAL MOTORS CORP.
  2. Remove the adjustment nut (1) from the shift control linkage.
  3. Disconnect the shift control linkage rod from the shift control assembly.
  4. Lower the vehicle.
  5. Remove the center console assembly. Refer to Front Floor Console Replacement .
    6. Fig 2: Identifying Shift Control Assembly Electrical Connector
    GM1954220Courtesy of GENERAL MOTORS CORP.
  6. Remove the electrical connector (1) from the shift control assembly.
    7. Fig 3: Identifying Shift Control Assembly To Tunnel Reinforcement Retaining Nuts
    GM1954230Courtesy of GENERAL MOTORS CORP.
  7. Remove the nuts (2) securing the shift control assembly to the tunnel reinforcement.
  8. Remove the shift control assembly (1) from the tunnel reinforcement.
scientia non olet · About LEMON Manuals