LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Torque Converter Housing Removal

Torque Converter Housing Removal

  1. Remove the transmission. Refer to Transmission Replacement .
    2. Fig 1: Torque Converter Housing
    GM801808Courtesy of GENERAL MOTORS CORP.
  2. Rotate the transmission 90 degrees so that the converter housing is facing up. Remove the torque converter housing bolts (2) from the torque converter housing (3).
  3. Remove the torque converter housing assembly (3) from the case (24).
  4. Remove the torque converter housing fluid seal assembly (4).
  5. Remove the fluid pump cover gasket (46).
scientia non olet · About LEMON Manuals