Pressure Regulation

Regulates pump output - line pressure in response to throttle signal fluid pressure acting on the line boost valve, spring force, and line pressure acting on the end of the valve. Line pressure is directed to the manual valve, the TCC regulator valve, feed limit valve, and the safety mode valve. Line pressure also feeds the converter feed circuit through the pressure regulator valve, and the accumulator fluid circuits.

Line pressure is routed through the valve and into the feed limit fluid circuit. The valve limits feed limit fluid pressure to a maximum pressure. Feed limit fluid is routed to the pressure control solenoid valve, the safety mode valve, the 1-2 control valve, and also feeds the 1-2 signal, the 2-3 signal, and the 4-5 signal fluid circuits.

Controlled by the TCM, the PC solenoid valve regulates filtered feed limit fluid pressure into the throttle signal fluid circuit.