LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Output Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Output Speed Sensor Retaining Bolt
    GM1956886Courtesy of GENERAL MOTORS CORP.
  1. Install the output speed sensor spacer (1).
  2. Install the output speed sensor (2).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the output speed sensor retaining bolt (3) and tighten to 11 N.m (97 lb in).
    4. Fig 2: Electrical Connector
    GM1956884Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector (3) to the output speed sensor (2).
  5. Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement .
scientia non olet · About LEMON Manuals