LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Wiring Harness Connector
    GM1956891Courtesy of GENERAL MOTORS CORP.
  1. Install the input speed sensor (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the input speed sensor retaining bolt (2) and tighten to 11 N.m (97 lb in).
    3. Fig 2: Electrical Connector
    GM1956882Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (1) to the input speed sensor (2).
  4. Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement .
scientia non olet · About LEMON Manuals