Tools Required

J 43074  Forward Clutch Piston Spring Compressor. See Special Tools .

Fig 1: View Of Forward Clutch Apply Plates
Courtesy of GENERAL MOTORS CORP.
1. Remove the forward clutch backing plate retainer ring (451).
2. Remove the forward clutch backing plate (450).
3. Remove the forward clutch plates (448 and 449). Refer to Clutch Plate Selection Specifications .
4. Remove the forward apply plate (447).
Fig 2: Identifying Coast Clutch Apply Components
Courtesy of GENERAL MOTORS CORP.
5. Remove the coast clutch housing (446).
6. Remove the coast backing plate (445).
7. Remove the coast clutch plates (443, 444). Refer to Clutch Plate Selection Specifications .
8. Remove the coast apply plate (442).
9. Remove the coast clutch spacer plate (441).
Fig 3: Compressing Coast Clutch Piston Spring With J 43074
Courtesy of GENERAL MOTORS CORP.
10. Use the J 43074  to compress the forward and coast clutch spring (439). See Special Tools .
11. Remove the snap ring (440).
12. Remove J 43074  . See Special Tools .
13. Remove the clutch spring (439).
Fig 4: Locating Forward & Coast Clutch Piston
Courtesy of GENERAL MOTORS CORP.
IMPORTANT: It may be necessary to apply air pressure to remove the piston.
14. Remove the coast clutch piston (438).
15. Remove the forward clutch piston (436).
Fig 5: Identifying Input Shaft Fluid Seals
Courtesy of GENERAL MOTORS CORP.
16. Remove the input shaft fluid seal (431).
17. Remove the input shaft fluid seals (432).