LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Control Valve Body Accumulator Assembly Disassemble

Control Valve Body Accumulator Assembly Disassemble

    Fig 1: View Of Safety Mode Valve Components
    GM801951Courtesy of GENERAL MOTORS CORP.
  1. Remove the safety mode valve retainer (343).
  2. Remove the safety mode valve spring (342).
  3. Remove the safety mode valve (341).
  4. Fig 2: Locating 3-4 Shift Valve
    GM801952Courtesy of GENERAL MOTORS CORP.
  5. Remove the 3-4 shift valve retainer (343).
  6. Remove the 3-4 shift valve spring (344).
  7. Remove the 3-4 shift valve (345).
  8. Remove the 3-4 shift control valve (346).
  9. Fig 3: Expanded View Of TCC PWM Solenoid & TCC Regulator Apply Valve
    GM801953Courtesy of GENERAL MOTORS CORP.
  10. Remove the torque converter clutch (TCV) pulse width modulated (PWM) solenoid valve retainer (351).
  11. Remove the tcc pwm solenoid (352).
  12. Remove the tcc regulator apply valve (348).
  13. Remove the tcc regulator apply valve spring (347).
  14. Fig 4: Identifying Feed Limit Valve
    GM801954Courtesy of GENERAL MOTORS CORP.
  15. Remove the feed limit valve retainer (343).
  16. Remove the feed limit valve spring (354).
  17. Remove the feed limit valve (353).
  18. Fig 5: View Of Pressure Control Solenoid
    GM801956Courtesy of GENERAL MOTORS CORP.
  19. Remove the pressure control solenoid retainer (351).
  20. Remove the pressure control solenoid (357).