LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Case Components Disassemble

Case Components Disassemble

    Fig 1: View Of Transmission Vent Assembly
    GM801828Courtesy of GENERAL MOTORS CORP.
  1. Inspect the transmission vent assembly for damage or being plugged. If the vent is damaged the torque converter housing (227) must be replaced.
    2. Fig 2: Locating Fluid Level Hole Plug & Pressure Test Plug
    GM801830Courtesy of GENERAL MOTORS CORP.
  2. Remove the pressure test plug (40).
  3. Remove the fluid level hole plug (36) and fluid level hole plug o-ring seal (37) from the case (604).
scientia non olet · About LEMON Manuals