LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 5L40-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> 2-3 Shift Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the transmission fluid pan. Refer to Automatic Transmission Fluid and Filter Replacement .
    2. Fig 1: View Of 2-3 Shift Solenoid & Electrical Wiring Harness Connector
    GM795839Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1) from the 2-3 shift solenoid (2).
    3. Fig 2: Locating Solenoid Retainer
    GM795835Courtesy of GENERAL MOTORS CORP.
  3. Using a suitable tool, remove the 2-3 shift solenoid retainer from the control valve body.
    4. Fig 3: Exploded View Of 2-3 Shift Solenoid
    GM792791Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2-3 shift solenoid (7) from the control valve body.
  5. Remove the O-ring seals (4-5) from the 2-3 shift solenoid (7) ONLY if the O-rings are cut or worn.
scientia non olet · About LEMON Manuals