LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle - AF33-5 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Shift Control Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Transaxle Shift Control Bracket
    GM1824433Courtesy of GENERAL MOTORS CORP.
  1. Install the transaxle shift control bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the transaxle shift control bracket.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

    3. Fig 2: Identifying Shift Control Cable
    GM1858349Courtesy of GENERAL MOTORS CORP.
  3. Install the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control cable bracket.
  4. Connect the shift control cable (1) to the transaxle range switch lever (4).
  5. Install the battery tray. Refer to Battery Tray Replacement .
scientia non olet · About LEMON Manuals