Shift Control Cable Adjustment

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Range Selector Cable Adjustment Lock Cover Retaining Tab

Courtesy of GENERAL MOTORS CORP.

Release the shift control cable adjustment lock cover retaining tab (1) on the bottom side.

Fig 2: Identifying Range Selector Cable Adjustment Lock Cover

Courtesy of GENERAL MOTORS CORP.

Slide the shift control cable adjustment lock cover (2) forward exposing the adjustment lock.
Carefully squeeze the adjustment lock tabs (1) inward to disengage the adjustment lock.

Fig 3: Identifying Range Selector Cable, Cable End & Adjustment Lock

Courtesy of GENERAL MOTORS CORP.

Lift the shift control cable adjustment lock (3).
The shift control cable (1) and cable end (2) are free to slide to proper adjustment. Ensure the shift lever and transmission are both in the PARK position.

Fig 4: Identifying Range Selector Cable Adjustment Lock

Courtesy of GENERAL MOTORS CORP.

Fig 5: Identifying Range Selector Cable Adjustment Lock Cover

Courtesy of GENERAL MOTORS CORP.

Slide the shift control cable adjustment lock cover (1) over the adjustment lock.
Inspect the operation of the starting system with the shift lever in each position. The engine should only crank when the lever is in the PARK or NEUTRAL position.