Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the left front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
- Remove the left splash shield. Refer to Engine Splash Shield Replacement .
- Remove the front engine mount. Refer to Engine Front Mount Replacement .
- Remove the transaxle oil cooler lines and seals from the transaxle. Refer to Fluid Cooler Pipe Seal Replacement .
- Remove the 9 TORX bolts (2) from the control valve body cover (1).
- Remove control valve body cover.
IMPORTANT:
Do not pry with a tool on the transaxle control valve body cover, case or sealing surfaces.