Tools Required

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Install the body of the J 45159 with the two long bolts (1) to the transaxle. See Special Tools .
Loosely install the arm and bolt (2) to the J 45159 body. See Special Tools .

NOTE: Refer to Fastener Notice .

Install the arm with the provided shorter bolt (3) to the transaxle.
Tighten: Tighten the J 45159 to 25 N. See Special Tools .m (18 lb ft) starting with bolt (3).
Install the J 45159 in the J 3289-20 . See Special Tools .