LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent GXP, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle - AF33-5 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Front Differential Bearing Race and Selective Shim Installation >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Front Differential Bearing Race Selective Shim
    GM784176Courtesy of GENERAL MOTORS CORP.
  1. Once the proper shim has been selected, install the new front differential bearing race selective shim (88) into the transmission case assembly.
  2. Fig 2: View Of Front Differential Bearing Race Installation
    GM784177Courtesy of GENERAL MOTORS CORP.
  3. Using J 8092  (1) and J 45184  (2), install the front differential bearing race (90) into the transmission case assembly. See Special Tools .
  4. After the front differential bearing race is correctly installed into the case, repeat the rotational torque measurement procedure to verify that the correct shim thickness was selected.