Tools Required
WARNING: This page is about a different variant/trim than selected.
- J 45166 Dial Indicator Extension Rod - 8 inch". See Special Tools .
- J 45200 Dial Indicator Set. See Special Tools .
- Install J 45166 into the fluid pump assembly bolt hole (1) indicated with the arrow. See Special Tools .
- Assemble J 45200 (1) onto J 45166 (2) and set the dial indicator to zero on the second clutch piston. See Special Tools .
- Apply compressed air into the second clutch fluid passage (B2) and measure the piston stroke. Be sure the piston moves smoothly.
- If the piston stroke is out of specifications, select another second clutch backing plate.
Specification: Second clutch piston bore stroke: 1.10 - 1.50 mm (0.043 - 0.059 in)
CAUTION:
Wear safety glasses when using compressed air in order to prevent eye injury.