Seat Cushion Cover and Pad Replacement - Front

Fig 1: View Of Front Seat Cushion Cover & Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket .
1	Front Seat Recliner Handle Tip: Pull firmly forward on the handle to remove.
2	Front Seat Outer Adjuster Finish Cover Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Fold Flat) or Seat Cushion Outer Trim Panel Replacement - Front Seat (Non-Fold Flat) .
3	Front Seat Belt Buckle Refer to Front Seat Belt Buckle Replacement .
4	Front Seat Inner Adjuster Finish Panel Refer to Seat Cushion Inner Trim Panel Replacement - Front (Non-Fold Flat) .
5	Front Seat Lumbar Support Actuator Knob Tip: Adjust the lumbar knob until the lumbar is in the setting of the least support. Remove the lumbar knob by pulling firmly away from the seat.
6	Front Seat Cushion Cover Tip: Remove the seat cushion frame bolts and seat cushion assembly from the seat. Disconnect the J-hook retainers. Disengage the J-strip at the rear of the cushion. Remove the seat cushion cover from the pad by carefully disengaging the hook and loop retainers.
7	Front Seat Cushion Pad