Seat Cushion Inner Trim Panel Replacement - Front (Non-Fold Flat)

Fig 1: View Of Front Seat Cushion Inner Trim Panel (Non-Fold Flat)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Front Seat Belt Buckle Bolt Tighten: 2 N.m (18 lb in)
2	Front Seat Belt Buckle Refer to Front Seat Belt Buckle Replacement .
3	Front Seat Inner Adjuster Finish Panel Screw (Qty: 3) Tighten: 2 N.m (18 lb in)
4	Front Seat Inner Adjuster Finish Panel