Heater Inlet Hose Replacement (LNF)

Fig 1: Heater Inlet Hose (2.0L)

Courtesy of GENERAL MOTORS CORP.

Heater Inlet Hose Replacement (2.0L)

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Drain the cooling system. Refer to Draining and Filling Cooling System (GE-47716) or Draining and Filling Cooling System (2.4L LE5 Only) . Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
1	Heater Inlet Hose Assembly Using SA9111E reposition the heater inlet hose clamp.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Heater Inlet Hose Assembly
Using SA9111E reposition the heater inlet hose clamp.