Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| A/C Refrigerant Valve | 11 N.m | 98 lb in |
| Bolt, A/C Compressor | 22 N.m | 16 lb ft |
| Bolt, A/C Condenser | 9 N.m | 80 lb in |
| Bolt, Distributor Air | 2.5 N.m | 16 lb in |
| Bolt, Hose Assembly, A/C Compressor and Condenser Hose | 22 N.m | 16 lb ft |
| Bolt, Radiator Assembly | 25 N.m | 18 lb ft |
| Bolt, Receiver Dehydrator Assembly | 6 N.m | 53 lb in |
| Bolt, Thermal Expansion Valve | 16 N.m | 12 lb ft |
| Bolt, Thermal Expansion Valve | 1.5 N.m | 13 lb in |
| Nut, A/C Condenser Tube | 9 N.m | 80 lb in |
| Nut, Air Inlet Housing | 9 N.m | 80 lb in |
| Nut, Distributor Air | 2.5 N.m | 16 lb in |
| Nut, Hose Assembly, A/C Compressor and Condenser Hose | 9 N.m | 80 lb in |
| Nut, Hose Assembly, A/C Evaporator | 16 N.m | 12 lb ft |
| Nut, Hose Assembly, A/C Evaporator Clip | 9 N.m | 80 lb in |
| Nut, HVAC Module Assembly | 9 N.m | 80 lb in |
| Nut, Tube Assembly, A/C Compressor | 16 N.m | 12 lb ft |
| Nut, Tube Assembly, A/C Condenser | 9 N.m | 80 lb in |
| Screw, Air Distribution Case | 1.5 N.m | 13 lb in |
| Screw, Air Inlet Housing | 1.5 N.m | 13 lb in |
| Screw, Air Outlet Duct | 1.5 N.m | 13 lb in |
| Screw, Blower Motor | 1.5 N.m | 13 lb in |
| Screw, Blower Motor Resistor | 1.5 N.m | 13 lb in |
| Screw, Evaporator Case Assembly | 1.5 N.m | 13 lb in |
| Screw, Heater Core Cover | 1.5 N.m | 13 lb in |
| Screw, Mode Actuator | 1.5 N.m | 13 lb in |
| Screw, Rear Air Outlet Duct | 1.5 N.m | 13 lb in |
| Screw, Receiver Dehydrator | 1.5 N.m | 13 lb in |
| Sensor, A/C Refrigerant Pressure | 5 N.m | 44 lb in |