LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice GXP, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 5L40-E/5L50-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Overdrive and Intermediate Clutch Disassemble

Overdrive and Intermediate Clutch Disassemble

WARNING: This page is about a different variant/trim than selected.

Tools Required

    Fig 1: View Of Overdrive Clutch Spacer
    GM801859Courtesy of GENERAL MOTORS CORP.
  1. Remove the overdrive clutch retainer (480) from the overdrive clutch housing (493).
  2. Remove the overdrive clutch backing plate (481) from the overdrive clutch housing (493).
  3. Remove the overdrive clutch plates (482, 483). Refer to Clutch Plate Selection Specifications .
  4. Remove the overdrive clutch spacer (484) from the overdrive clutch housing (493).
    5. Fig 2: Locating Overdrive Piston Spring & Retainer
    GM801860Courtesy of GENERAL MOTORS CORP.
  5. Use J 44764  and J 23327  to compress the overdrive clutch piston spring (486). See Special Tools .
  6. Remove the overdrive clutch piston spring retainer ring (485) from the overdrive clutch housing (493).
  7. Remove J 44764  and J 23327  from the overdrive clutch housing (493). See Special Tools .
  8. Remove the overdrive clutch spring (486) from the overdrive clutch housing (493).
    9. Fig 3: Removing Overdrive Clutch Piston From Overdrive Clutch Housing
    GM801861Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It may be necessary to use air pressure to remove the piston.
  9. Remove the overdrive clutch piston (487) from the overdrive clutch housing (493).
    10. Fig 4: View Of Intermediate Clutch Plates
    GM801862Courtesy of GENERAL MOTORS CORP.
  10. Remove the intermediate clutch backing plate retainer ring (488) from the overdrive clutch housing (493).
  11. Remove the intermediate clutch backing plate (489) from the overdrive clutch housing (493).
  12. Remove the intermediate clutch plates (490, 491) from the overdrive clutch housing (493). Refer to Clutch Plate Selection Specifications .
  13. Remove the intermediate clutch apply plate (492) from the overdrive clutch housing (493).
    14. Fig 5: Identifying Intermediate Clutch Housing Retainer Ring
    GM801863Courtesy of GENERAL MOTORS CORP.
  14. Use J 44764  and J 23327  to compress the intermediate clutch housing (496). See Special Tools .
  15. Remove the intermediate clutch housing retainer ring (497) from the overdrive clutch housing (493).
    16. Fig 6: Locating Intermediate Housing
    GM801864Courtesy of GENERAL MOTORS CORP.
  16. Remove J 44764  and J 23327  from the overdrive clutch housing (493). See Special Tools .
  17. Remove the intermediate clutch housing (496), and the intermediate clutch spring (494) from the overdrive clutch housing (493).
    18. Fig 7: View Of Intermediate Piston & Intermediate Clutch Housing
    GM801865Courtesy of GENERAL MOTORS CORP.
  18. Remove the intermediate clutch piston (495) from the overdrive clutch housing (496).
scientia non olet · About LEMON Manuals