Overdrive Clutch Housing Removal

WARNING: This page is about a different variant/trim than selected.

Tools Required

J 45126 Snap Ring Pliers. See Special Tools .

Fig 1: Identifying J 45126

Courtesy of GENERAL MOTORS CORP.

CAUTION: Use care when removing or installing the snap ring. Be sure the J 45126 snap ring pliers are installed properly onto the snap ring or bodily injury may occur.

Use J 45126 to remove the snap ring (14). See Special Tools .

Fig 2: Identifying Overdrive Clutch Housing

Courtesy of GENERAL MOTORS CORP.

Remove the overdrive clutch housing (15) from the case (24).