LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> Solstice GXP, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 5L40-E/5L50-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Case Assembly Inspection

Case Assembly Inspection

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Inspecting Transmission Name Plate & Oil Cooler Fittings
    GM801826Courtesy of GENERAL MOTORS CORP.
  1. Inspect the components that are still on the transmission case for the following conditions:
    • Loose, cross-threaded, or damaged threads on the transmission oil cooler fittings
    • A loose, missing, or damaged transmission name plate
    2. Fig 2: Inspection Areas On Transmission Case
    GM801827Courtesy of GENERAL MOTORS CORP.
  2. Inspect the transmission case for the following conditions:
    • Gasket sealing surfaces that are damaged or have porosity
    • Bolt and screw holes that are stripped or damaged - repair with thread insert
    • Damaged or porous case and fluid passages
    • Damaged snap ring grooves or housing splines
    • A loose, cross threaded, or damaged pressure test plug and fluid level hole plug
scientia non olet · About LEMON Manuals