LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Crankshaft Pulley Removal >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 8614-01  Pinion Flange Holder. See Special Tools .

    Fig 1: Tightening/Loosening Crankshaft Pulley Retaining Bolt Using J 8614-01
    GM234153Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft pulley retaining bolt using J 8614-01  to prevent crankshaft rotation when loosening the bolt. See Special Tools .
  2. Remove the crankshaft pulley.
scientia non olet · About LEMON Manuals